Discussing with the craftsmen

Technical Data Flanging Machine

Max. sheet thicknesses:
For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point:        35 mm
For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point :        28 mm
Min. sheet thicknesses:
For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point          5 mm
For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point          5 mm

The machine is designed for manufacturing the following head dimensions without center hole: 

max. clearance of frame   7.050  mm
max. tori-spherical heads (r=0,1xD)   6.000  mm
min. tori-spherical heads (r=0,1xD)   2.000  mm
max. semi-elliptical heads (r=0,8xD) DIN-Norm   6.000  mm
min. semi-elliptical heads (r=0,8xD) DIN-Norm   2.000  mm
max. semi-elliptical heads (2:1) ASME-Norm   6.000  mm
min. semi-elliptical heads (2:1) ASME-Norm   2.000  mm
max. flat heads as per factory-Norm about:   6.200  mm
min. flat heads as per factory-Norm about:   2.000  mm
min. head diameter with additional clamping device with hole about   1.200  mm
Knuckle radius:
max. knuckle radius about   1.000  mm
min. knuckle radius about 25 mm