Max. sheet thicknesses:
For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point: | 35 mm |
For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point : | 28 mm |
Min. sheet thicknesses:
For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point | 5 mm |
For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point | 5 mm |
The machine is designed for manufacturing the following head dimensions without center hole:
max. clearance of frame | 7.050 mm |
max. tori-spherical heads (r=0,1xD) | 6.000 mm |
min. tori-spherical heads (r=0,1xD) | 2.000 mm |
max. semi-elliptical heads (r=0,8xD) DIN-Norm | 6.000 mm |
min. semi-elliptical heads (r=0,8xD) DIN-Norm | 2.000 mm |
max. semi-elliptical heads (2:1) ASME-Norm | 6.000 mm |
min. semi-elliptical heads (2:1) ASME-Norm | 2.000 mm |
max. flat heads as per factory-Norm | about: 6.200 mm |
min. flat heads as per factory-Norm | about: 2.000 mm |
min. head diameter with additional clamping device with hole | about: 1.200 mm |
Knuckle radius:
max. knuckle radius | about: 1.000 mm |
min. knuckle radius | about 25 mm |
R Cordewener Management & Consultancy BV
Boven de Wolfskuil 3 – Office C29-20-21, 6049 LX, Roermond
P.O. box 7111, 6050 AC Maasbracht
Chamber of Commerce / KVK : 12059560
VAT / BTW: NL8150.05.143.B01
Raymond Cordewener | Director
+31 (0) 6 53551792
Skype: rcordewener
rcordewener@rcordewener.nl
or r.cordewener@rcordewener.com
Lydia Oberije | Management Assistant
+31 (0) 6 27650556
loberije@rcordewener.nl
Copyright © 2022 | All Rights Reserved | Website created by: Baas & Baas