Technical Data Flanging Machine
| Max. sheet thicknesses: | |||
| For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point: | 35 | mm | |
| For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point : | 28 | mm | |
| Min. sheet thicknesses: | |||
| For unalloyed structural steel with tensile strength up to 450 MPa and 260 MPa yield point | 5 | mm | |
| For austenitic Cr-Ni steel with tensile strength up to 750 MPa and 370 MPa yield point | 5 | mm |
The machine is designed for manufacturing the following head dimensions without center hole:
| max. clearance of frame | 7.050 | mm | |
| max. tori-spherical heads (r=0,1xD) | 6.000 | mm | |
| min. tori-spherical heads (r=0,1xD) | 2.000 | mm | |
| max. semi-elliptical heads (r=0,8xD) DIN-Norm | 6.000 | mm | |
| min. semi-elliptical heads (r=0,8xD) DIN-Norm | 2.000 | mm | |
| max. semi-elliptical heads (2:1) ASME-Norm | 6.000 | mm | |
| min. semi-elliptical heads (2:1) ASME-Norm | 2.000 | mm | |
| max. flat heads as per factory-Norm | about: | 6.200 | mm |
| min. flat heads as per factory-Norm | about: | 2.000 | mm |
| min. head diameter with additional clamping device with hole | about | 1.200 | mm |
| Knuckle radius: | |||
| max. knuckle radius | about | 1.000 | mm |
| min. knuckle radius | about | 25 | mm |